Nokia Maemo and OpenCL

Reading Time: 3 minutes

Update 21-06-2011: Bumped into a project by Nokia: CLEP, “OpenCL Embedded Profile” for the N900.

Maemo is the Debian based Linux-distribution of Nokia for embedded devices. It is on the gadget N900, so you can be root on your own phone and compile your own kernel. In other words: a great developer’s phone.

Which smartphone to buy when you want to toy around with OpenCL “Embedded Profile”? There is more and more evidence that the next iPhone OS will have support for OpenCL, as should be expected Apple being the trademark-owner of OpenCL. This is good, since the mobile market could make the difference for the technique – competing with CUDA and DirectCompute. “The other ARM Cortex-A8 smartphone”, the Nokia N900 does not support it, while the magic of OpenCL attracts to many developers on the Maemo-forums.

The QT-blog that disclosed coming OpenCL-support for QT, spoke about it too:

>>Right now, QtOpenCL works very well with desktop OpenCL implementations, like that from NVIDIA (we’ve tested it under Linux, Mac, and Windows). Embedded devices are currently another matter – OpenCL implementations are still very basic in that space. The performance improvements on embedded CPU’s are only slightly better than using ARM/NEON instructions for example. And embedded GPU’s are usually hard-wired for GLSL/ES, lacking many of the features that makes OpenCL really sing. But like everything in the embedded space, things are likely to change very quickly. By releasing QtOpenCL, hopefully we can stimulate the embedded vendors to accelerate development by giving them something to test with. Be the first embedded device on the block to get the mandelbrot demo running at 10fps, or 20fps, or 60fps!<<

But checking the whole Nokia QT/Maemo-SDK for something like “opencl.h” or words like “opencl” and “khronos” in .h-files did not return anything interesting. The missing reference in the SDK tells me, we cannot expect any OpenCL-implementation on the N900 soon. So do we have to wait for the Nokia N920, Maemo 6 and QT 4.8? Once I know more, by getting deeper into the SDK, you’re the first to know. But first let me show you the documents which tells us OpenCL is coming to the Maemo-platform.

The Maemo Base Port Document, version 1.1

Exhibit number 1. The introduction tells us that the document describes what hardware-designers should do to get Maemo working on their device:

>>When Maemo is ported to a new chipset and HW environment, the majority of the SW worktakes place in the base layer. However, some adjustments may also be needed in the otherlayers. The porting work as a whole is a combined effort by the chipset vendor and Nokia. Thisdocument describes the deliverables expected from the chipset vendor in such an effort. The requirements in this document are expressed in the form of SW component, interface andfunctional requirements. Note that in many cases more detailed discussions are neededbetween Nokia and the chipset vendor to reach a common understanding about the specificsof the system architecture and the required component versions, functionality and interfaces.<<

So the document describes what the hardware must support, to be able to run Maemo. Let’s then find the magic word “OpenCL”:

>>Graphics Adaptation. The Base Port graphics adaptation interfaces consist of X11, OpenGL ES, and OpenVG interfaces. The OpenCL interface is also included in this group since it typically is used to access the GPU for general-purpose parallel computation.<<

And somewhat below:

>>OpenCL 1. The Base Port should provide an implementation of the OpenCL 1.0 interface for general-purpose parallel programming of heterogeneous systems, especially for the use of GPUs for computation (Khronos group standard).<<

That seems to be pretty clear that Maemo-devices must be able to support OpenCL.

http://www.forum.nokia.com/piazza/wiki/images/7/7d/Maemo_Base_Port_v1.1.pdf

Paper “OpenCL on Embedded devices” by Nokia

Exhibit 2 shows tests of a few simple OpenCL-program on an unnamed device with a TI OMAP 3430 (550 MHz ARM Cortex-A8 CPU & 110 MHz POWERVR SGX530 GPU) – which happens to be in the Motorola Droid, Palm Pre, and Nokia N900. So they managed to create a OpenCL-implementation on ARM. If you’re interested in OpenCL for embedded devices, please do read this presentation:

http://www.khronos.org/developers/library/2009-hotchips/Nokia_OpenCL-in-Handheld-Devices.pdf

It is a document from august 2009, which shows they actually were trying POWERVR and OpenCL then. Now with QT and Maemo mentioning it, we can be very sure the N900 or the N920 is eventually going to have OpenCL-support.

 

Related Posts

default

Waiting for Mobile OpenCL

...  Mali GPU and Imagination Technology's PowerVR, regarding OpenCL-potential. Here is an overview of what I found out until now and ...